35
Detection circuit for 15V has an error
Quick answer
Error code 35 refers to a fault in the detection circuit for the 15V power supply. This issue can prevent the system from functioning correctly and requires attention to ensure safe operation.
Does this apply to your bike?
H700 · Bafang · Common displays: DP E171
Heads-up: the same number can mean different things on other systems — always check your drive system first. Browse all drive systems →
What you’ll notice
The display shows error code 35, indicating a fault in the detection circuit.
Likely causes, ranked
Start at #1 — causes are ordered by how often they turn out to be the problem.
#1 Faulty detection circuit
How to check: Inspect the wiring and connections related to the 15V detection circuit.
Troubleshooting steps
-
Connect to BESST
Connect the eBike to the BESST diagnostic tool to update the controller.
If it passes →Proceed to clear the error code.If it fails →Replace the controller. -
Clear the error code
Ensure all components are connected and turn on the system to check if the error persists.
If it passes →Repair complete.If it fails →Contact Bafang for further assistance.
When to stop and get professional help
If the error persists after following the steps, or if there are visible damages to the components.
Never open, puncture, or disassemble the battery pack, and never bypass the BMS. See our safety guide.
More codes for H700
Different number? Type it into the search box at the top of the page.
Did this fix your problem?
None% of riders reported this solved
Sources & verification
- "30" - Communication failed - Bafang E
- BAFANG | FAQs |
- Bafang Error Codes List: Meanings, Quick Fixes, and When to Contact a | Upway
- Bafang Error Code Documentation
- E-bike Error Code Troubleshooter: Bosch Smart System, Shimano, Bafang, DJI Avinox Codes Explained
Missing a code or step? Tell us.
Spotted a code we don’t cover, or a step that didn’t match your bike? Send it in — submissions shape what we research next.