37
WDT circuit fault
Quick answer
Error code 37 signifies a fault in the Watchdog Timer (WDT) circuit. This circuit is crucial for monitoring the system's operation and ensuring that the controller functions correctly. If this error occurs, it may prevent the eBike from operating normally.
Does this apply to your bike?
H700 · Bafang · Common displays: DP E171
Heads-up: the same number can mean different things on other systems — always check your drive system first. Browse all drive systems →
What you’ll notice
The display shows error code 37, and the motor may not function.
Likely causes, ranked
Start at #1 — causes are ordered by how often they turn out to be the problem.
#1 Faulty WDT circuit
How to check: Inspect the controller for any visible damage or loose connections.
Troubleshooting steps
-
Inspect the controller
Check the controller for any signs of damage or loose connections.
If it passes →Proceed to reset the system.If it fails →Contact a professional for repair. -
Reset the system
Turn off the eBike, wait a moment, and then turn it back on.
If it passes →Check if the error code clears.If it fails →Contact a professional for repair.
When to stop and get professional help
If the error persists after inspection and reset, stop riding and seek professional help.
Never open, puncture, or disassemble the battery pack, and never bypass the BMS. See our safety guide.
More codes for H700
Different number? Type it into the search box at the top of the page.
Did this fix your problem?
None% of riders reported this solved
Sources & verification
- "30" - Communication failed - Bafang E
- BAFANG | FAQs |
- Bafang Error Codes List: Meanings, Quick Fixes, and When to Contact a | Upway
- Bafang Error Codes List
- "14" - Over temperature of controller - Bafang E
Missing a code or step? Tell us.
Spotted a code we don’t cover, or a step that didn’t match your bike? Send it in — submissions shape what we research next.